Spanish Cedar
Spanish Cedar wood is a beautiful and light-colored hardwood commonly used for furniture and cabinetry due to its resistance to decay and insect infestations. Not only does it offer superior protection for valuable items stored inside. But it also has a pleasant aroma that can reduce humidity in storage areas.
Common Names :Spanish Cedar, Cedro
Scientific Names : Cedrela odorata
Distribution: Native to Central and South America and the Caribbean;
Janka Hardness:600 lbf (2,670 N)
LENGTH | 75" to 85" (Inches) |
---|---|
WIDTH | 5" to 10" (Inches) |
THICKNESS | Nominal Thickness 8/4 (The planning/smoothing process removes some thickness) See Explanations |
KILN-DRIED? | Yes |
MOISTER CONTENT | 7% to 9% |
GRADE | Select & Better |
How To Order Lumber
What is Nominal & Actual Thickness?
Exotic Wood Zone offers some of the finest Exotic Woods and American Hardwood Lumbers. These Hardwood Lumbers are consistently dried to a moisture content between 6-8% and properly conditioned.
About Lumber Sizes
Width: 5" to 10"
The price shown is for a random selection of widths within this range. If you need custom widths, please contact us. (We also provide straight edge rip for free)Length: 75" to 85"
This is the range of lengths that we might have in stock. The length you receive depends on how much you order.Thickness: 2"
Also known as 8/4,If you need a planned and smooth surface, we provide it at no cost. (Note: the planning process removes some thickness.)
Due to costs, we will not ship over 7 ft in Length.
If you need more than 50 board feet, feel free to contact us. We are happy to serve you better for 100% satisfaction.
How To Order Lumber
1
2
3
What Is Surface Finishing/Planing?
Rough Sawn- The edges are rough cut and both surfaces will be unplanned.
SLR1E (straight line ripped one edge )- one edge is ripped straight.
SLR2E (straight line ripped two edges)- two edges is ripped straight.
S2S - The board has been run through a planer producing two flat faces, but the edges are left rough.
S3S - The board has been surfaced S2S first, then one edge is ripped straight (also known as SLR1E or straight line ripped one edge).
S4S - The board has surfaced on both faces (S2S) and received a rip on both edges, resulting in a board with two flat and parallel faces and two flat and parallel edges. This is the stuff you usually find for sale in the hardwood section of big box stores like Home Depot and Lowes.
Note: Planing will reduce the total board feet you receive slightly. Moreover, the actual thickness may vary slightly.
You take the length x width x thickness and then divide this by 144 (if all measurements are in inches)Here’s an example. A Lumber piece measures 20” wide, 48” long, and 1” thick Then the board feet will be 20 x 48 x 1
Yes, most of our lumber, luthier products, turning blanks, bowl blanks, etc are all rough cut. We do plane body blanks and this option is added when you buy. We do plane them down at no extra cost.
Nominal sizes harken back to the original rough green lumber sizes. The actual sizes are sizes after drying and surfacing the rough green lumber on all four sides.
Nominal Thickness | Actual Thickness (S1S) | Actual Thickness (S2S) |
---|---|---|
4/4 (1") inch | 7/8 inch | 13/16 inch |
6/4 (1-1/2") inch | 1-3/8 inch | 1-5/16 inch |
8/4 (2") inch | 1-13/16 inch | 1-3/4 inch |
12/4 (3") inch | 2-13/16 inch | 2-3/4 inch |
16/4 (4") inch | 3-13/16 inch | 3-3/4 inch |
Yes, we do custom size orders. But there has to be a minimum of $200 order. But again we try our best to help out in other cases if we can.
Please email at jockey@exoticwoodzone.com
Or contact us Here
Yes, we utilize a network of freight companies and are happy to arrange that for you.
California Proposition 65 Warning
Cancer and Reproductive Harm
www.p65warnings.ca.gov
FAQs
1) Are these sizes true sizes?
Yes, these sizes are True. The Measurements that you see are what you will be getting. For example, if it says 2" x 2" x 12” then that's the exact size you will be getting. However, If you ask, it will be planned or jointed. Then the answer is no. It will be rough sawn cut sizes.
2) Are these kiln-dried or air-dried
80 percent of our stock is kiln-dried. The stock that is not kiln dried is East Indian Rosewood, Gaboon Ebony, and Black palm. Leopardwood that's 2” and above is not kiln dried. We normally sell this kiln-dried. But the current stock is not kiln dried.
3) What is Moisture?
Kiln-dried are mostly between 8-10 percent. We are located in St. Louis, Missouri so we have high humidity and hence our moisture is high. Air-dried varies mostly by 12-15 percent.
4) Are these Quarter Cut or Rift sawn or Flat sawn?
This varies. However, 100 percent of our back and sides, neck blanks, and fingerboards are Quarter cut and book matched except Birdseye maple.
5) Are these rough cuts?
Yes, most of our lumber, luthier products, turning blanks, bowl blanks, etc are all rough cut. We do plane body blanks and this option is added when you buy. We do plane them down at no extra cost.
6) Are these Planned or Jointed?
Not planned or jointed. We do this occasionally for customers who don't have access to a planer or jointer at no extra cost.
7) Would you plane this piece?
Yes, we can do this. At this moment we are backed up but in exceptional cases, we can help out. Please email at jockey@exoticwoodzone.com
8) Would you joint this for me?
Again we can do this at no extra cost if time permits us. Please email at jockey@exoticwoodzone.com
9) Do you do custom cut?
Yes, we do custom size orders. But there has to be a minimum of $200 order. But again we try our best to help out in other cases if we can.
10) How is board foot calculated?
You take the length x width x thickness and then divide this by 144 (if all measurements are in inches)Here’s an example. A Lumber piece measures 20” wide, 48” long, and 1” thick Then the board feet will be 20 x 48 x 1
11) Why is lumber so expensive?
Even though most of the moisture is removed from lumber, wood is still a dense material. Most of the ground freight carriers built the companies to deliver packages much smaller in dimension and lighter than the weight of lumber. When it comes to lumber due to the sheer size of it, shipping companies charge a lot for shipping. We offer free shipping. That's why you are in good hands as we deal with the shipping companies ourselves and get you the best rate and sell the products at on rate.
12)What kind of lumber do you stock?
Our specialty is hardwood lumber both exotic and domestic except for Basswood.
Domestics
- Basswood
- Black Walnut
- Hard Maple
- Cherry
- Hard Maple
- Birdseye maple
- White Ash
- Curly Hard Maple
- Alder
- Poplar
- Ambrosia Maple
Exotics
- Sapele
- Genuine Mahogany
- African Mahogany
- Spanish Cedar
- Purpleheart
- Padauk
- Bloodwood
- Cocobolo
- Zebrawood
- Leopardwood
- Bocote
- Olivewood live edge slabs
- African blackwood
- Chechen
- Granadillo
We also have a rotating mix of specialty lumber that we carry and are always adding the additional stock. If you are on the hunt for something specific, email us at jockey@exoticwoodzone.com and we can let you know if we have any in stock or plan to in the near future.
13)Does Exotic Wood Zone straight line rip and plane their lumber?
We give you the option. We know some people like to work with the most width and thickness possible. If we are not very busy then we do this for free. Please email us with any special requests to jockey@exoticwoodzone.com Shipping Info We like to keep things simple, and that includes getting your lumber products to you as efficiently as possible. Hence we have added free shipping on 100 percent of products.
14)When will my order ship?
Once we receive your order, we generally start processing it within one business day. From there, the products included in your order will dictate how quickly we can ship them. We’ll keep you updated along the way, and send an email that includes delivery tracking information when your order departs our facility. If you have schedule questions before placing your order, feel free to email us jockey@exoticwoodzone.com and we’ll get them answered. If you want this shipped asap please email us also. If it's not urgent don't do it as someone who needs it shipped as soon as possible will get it delayed.
15) I'm placing a large order. Do you ship via freight?
Yes, we utilize a network of freight shipping companies and are happy to arrange that for you.
16) I live outside of the United States. Will you ship to me?
Yes, we do ship internationally. Please do email us with the shipping cost. International shipping is not free.
17)Can I track my order once it leaves your warehouse?
Yes, once your order is submitted, processed, and leaving our facility, you’ll receive an email notification sharing delivery tracking information.
18)Am I allowed to return a product for a refund?
Yes, we have a 60-day return policy we pay for return shipping and we don't charge restocking fees. This is the best guarantee offered by us because we believe our customers need the best treatment and best pricing.