Aprenda sobre las maderas exóticas
How to Finish Red Gum Burl for the Deepest Color and Figure
To finish Red Gum Burl for its best color and figure, sand to a minimum of 320 grit, raise the grain once, fill any checks with CA glue, and use...
Leer más
How to Stain Basswood Evenly Without Blotching
Basswood requires an even sanding up to 180-220 grit for an even stain. It should be sealed using a wood conditioner or a wash coat of shellac followed by application...
Leer más
How to Make a Wooden Ring from Exotic Wood Ring Blanks: A Step-by-Step Guide
The procedure for making a wooden ring starts by cutting wooden ring blanks to a size of 1/2 inch, drilling the center hole to fit your ring size, mounting it...
Leer más
Is Lacewood Worth It? Properties, Uses, and Why Its Pattern Changes Under Finish
Lacewood is a great option if you are looking for a stunning, spotted figure that is economical and exotic. It is medium hard, easy to cut and sand, and ideal...
Leer más
How to Shop a Halloween Spooktacular Sale Smartly
A wood sale can turn out to be akin to a treasure hunt. With slender stock boards, dramatic grain droptops, burls and blanks all on discount, it is very easy...
Leer más
How to Turn a Burl Pepper Mill Without Cracking or Tearout
In order to prevent any cracking or tear out, begin with a seasoned, dry, stable blank, stabilize all imperfections with thin CA glue, and drill the cavity for the mechanism...
Leer más
Burl Guitar Drop Tops: What They Are and How Luthiers Use Them
The burl guitar drop tops are thin sheets of burl wood that are glued onto solid guitar bodies for the purpose of enhancing the guitar's appearance with the help of...
Leer más
How to Stop Wood Cookies From Cracking as They Dry
To prevent wood cookies from cracking, cover the bark side and both sides after cutting the wood, then dry the cookie slowly in a shady and stable environment. This is...
Leer más
How to Flatten and Resurface a Warped Exotic Wood Cutting Board: Step-by-Step Guide
Firstly, you need to wet the concave surface and allow it to dry on the rack for an even drying. Should the board remain warped, flatten both surfaces using a...
Leer más
Wood Guitar Rosettes: Species Selection, Inlay Techniques, and Fitting Tips for Luthiers
The most suitable wood guitar rosettes combine a type of wood with which the soundboard differs with another type of wood removed from the wood: Spanish Cedar or Sapele for...
Leer más