En savoir plus sur les bois exotiques
Black Friday Early Access at Exotic Wood Zone: what’s on sale and how to claim your free gift
Early Access Black Friday Sale at Exotic Wood Zone takes place between November 16th and 22nd, 2026, and will see discounts up to 60 percent off selected wood products, free...
Lire plus
How to Finish Red Gum Burl for the Deepest Color and Figure
To finish Red Gum Burl for its best color and figure, sand to a minimum of 320 grit, raise the grain once, fill any checks with CA glue, and use...
Lire plus
How to Stain Basswood Evenly Without Blotching
Basswood requires an even sanding up to 180-220 grit for an even stain. It should be sealed using a wood conditioner or a wash coat of shellac followed by application...
Lire plus
How to Make a Wooden Ring from Exotic Wood Ring Blanks: A Step-by-Step Guide
The procedure for making a wooden ring starts by cutting wooden ring blanks to a size of 1/2 inch, drilling the center hole to fit your ring size, mounting it...
Lire plus
Is Lacewood Worth It? Properties, Uses, and Why Its Pattern Changes Under Finish
Lacewood is a great option if you are looking for a stunning, spotted figure that is economical and exotic. It is medium hard, easy to cut and sand, and ideal...
Lire plus
How to Shop a Halloween Spooktacular Sale Smartly
A wood sale can turn out to be akin to a treasure hunt. With slender stock boards, dramatic grain droptops, burls and blanks all on discount, it is very easy...
Lire plus
How to Turn a Burl Pepper Mill Without Cracking or Tearout
In order to prevent any cracking or tear out, begin with a seasoned, dry, stable blank, stabilize all imperfections with thin CA glue, and drill the cavity for the mechanism...
Lire plus
Burl Guitar Drop Tops: What They Are and How Luthiers Use Them
The burl guitar drop tops are thin sheets of burl wood that are glued onto solid guitar bodies for the purpose of enhancing the guitar's appearance with the help of...
Lire plus
How to Stop Wood Cookies From Cracking as They Dry
To prevent wood cookies from cracking, cover the bark side and both sides after cutting the wood, then dry the cookie slowly in a shady and stable environment. This is...
Lire plus
How to Flatten and Resurface a Warped Exotic Wood Cutting Board: Step-by-Step Guide
Firstly, you need to wet the concave surface and allow it to dry on the rack for an even drying. Should the board remain warped, flatten both surfaces using a...
Lire plus