Purpleheart
| Common Name | This tree can also be known by the following names Purpleheart and Amaranth |
|---|---|
| Scientific Name | Peltogyne spp. |
| Distribution | This tree is guaranteed to be found in Central and South America (from the United Mexican States right down to southern Brazil). |
| Tree Size | The tree will reach up to a height of 100-170 foot (30-50 m) tall, 3-5 foot (1-1.5 m) trunk diameter. |
| Dried Weight ( average ) | 56 lbs/ft3 (905 kg/m3). |
| Specific Gravity | 76, .90 |
| Janka Hardness | 2,520 lbf (11,190 N) |
It is understood from the name of the wood we are dealing with here the wood can bring a touch of royalty to the space. Belonging to the Peltogyne species this wood descends from the territories of central and South America. These tropical rainforest trees can most commonly be found in the rainforests of Brazil, Suriname and Guyana.
This tree reaches up to a massive height of 100ft. This tree when freshly cut portrays a dull greyish color and slowly develops into a deeper and royal purple color when exposed properly to sunlight. This tree does pose certain challenges while working with it. As it is straight to moderately grained and textured it takes a toll on cutters and machines with continuous use and eventually dull them.
One of the best things about this wood is that it is being crowned as a very durable wood. Being resistant to decaying with age and resistant to the attack of insects and pests like the marine borers, these woods can last for a very long time.
Although this tree has not yet reported to cause any form of severe reactions. Purpleheart has been reported as a sensitizer. Usually, most common reactions simply include eye and skin irritation. Purpleheart has also been reported to cause nausea. So it is advised that the wood workers should be provided with proper equipment to ensure the safety of the workers while being employed.
Color: When freshly cut the heartwood of Purpleheart could be a dull grayish/purplish brown. Upon exposure, the wood becomes a deeper eggplant purple. With any age and exposure to ultraviolet ray light, the wood becomes a dark brown with a touch of purple. This color-shift may be slowed and reduced by employing an actinic radiation inhibiting end on the wood.
Texture: The grain is sometimes straight, however it can even be wavy or irregular. Features a medium texture with an honest natural luster. Diffuse-porous; medium to massive pores, few; solitary and radial multiples; mineral deposits often present; growth rings are also either distinct or fuzzy looking on species and growing conditions; medium rays barely visible while not the lens, traditional spacing; parenchyma winged, lozenge, confluent, unilateral, and infrequently marginal.
Workability: Working with Purpleheart will gift some distinctive challenges: if the wood is heated with uninteresting tools, or if cutter speeds are too high, Purpleheart can exude a viscid organic compound which will clog tools and complicate the machining method. Looking at the grain orientation, it may be tough to plane while not tearout. Purpleheart conjointly features a moderate dulling impact on cutters.
Odor: The odor produced by the wood varies relying upon the species: most species don't have any characteristic odor, although some species will have a pungent scent. This characteristic odor can be known to the woodworkers while working with this wood.
Availability: The Purple heart wood is widely offered as lumber in smart widths and thicknesses. The Purple heart wood is available in medium to low range. This wood species has not been listed within the CITES Appendices or on the IUCN Red List of vulnerable species.
Uses: The Purple heart wood is used in inlays/accent pieces, flooring, furniture, boatbuilding, heavy construction, and a variety of specialty wood items. Sometimes called Amaranth, this colorful Latin American hardwood is tremendously popular for furniture and other designs that call for a touch of royalty. In addition to its coloration, Purpleheart has excellent strength properties and can be used in applications where strength is important—a wood for both form and function.
Here is the few finished product's images
Frequently asked Questions
When the wood gets hot from sanding it turns brown, it'll flip back in a day or so. I invariably use water based poly on woods like purpleheart to seal the wood and keep the intense colours. I end with spray lacquers a {great deal} with great success. and keep it out of direct daylight.
The dry timber is incredibly hard, stiff and dense with a particular gravity of zero.86 (860 kg/m3 or fifty four lb/cu ft). Purpleheart is correspondingly tough to figure with. it's terribly sturdy and waterproof.
Using a cupboard hand tool is equivalent to sanding with a far finer grit than a hundred and twenty. those that are simply reaching to use sandpaper ought to continue on to 180 or 220 for a film end, associated to 320 or maybe 400 once using an oil end, although that fine sanding beneath an oil finish can profit the maker over the user since the results can more or less disappear in a very few weeks because the end and wood oxidize.
Purple Heart cutting board Strips. These chopping board strips are cut from premium kiln-dried lumber. They are able to be ripped or cut to create your own custom chopping board. you'll have 8-10 strips to create a 10"-15" wide chopping board.
Prices within the low to medium vary for an foreign hardwood. Purpleheart is additionally a reasonably expensive wood, that is why it's sometimes employed in smaller-scale projects.
Purpleheart starts out light, virtually lavender, and darkens to an upscale purple. eventually it'll flip brown - this is often common to just about any weird color woods (box elder, yellowheart, etc). virtually universally the cause is uv light reaction over time. the best means of management are 2 fold:
1: Minimize its exposure to ultraviolet light, primarily daylight.
2: Use a high coat with a robust uv blocker. The simplest presently is water based lacquer. Unsure that whole can shield best, however across the board they're all head and shoulders the other top coat
Peltogyne, normally called purpleheart, amendoim, violet wood, amaranth and different native names (often referencing the color of the wood) could be a genus of twenty three species of flowering plants within the family Fabaceae; native to tropical rainforests of Central and South America; from Guerrero, Mexico, through Central America, and as so much as south-eastern Brazil.
Inlays/accent items, flooring, furniture, boatbuilding, serious construction, and a spread of specialty wood things. usually observed as Amaranth, this vibrant resident hardwood is vastly common for furnishings and completely different designs that call for a novel splash of color.
In addition to its coloration, Purpleheart has marvelous strength properties and can be used in applications where strength is important—a wood for every kind and performance.
They are medium-sized to massive trees growing to 30–50 m (100–160 ft) tall, with trunk diameters of up to 1.5 m (5 ft). The leaves are alternate, divided into a symmetrical try of huge leaflets 5–10 cm (2–4 in) long and 2–4 cm (1–2 in) broad. The flowers are little, with 5 white petals, made in panicles. The fruit could be a pod containing one seed. The timber is fascinating, however troublesome to work.
Purpleheart is prized to be used in fine inlay work particularly on musical instruments, stringed instrument fret boards (although rarely), woodturning, cabinetry, flooring, and piece of furniture. The timber is additionally valuable in applications that need toughness, like truck decking.
Peltogyne, ordinarily called purpleheart, amendoim, violet wood, amaranth and alternative native names (often referencing the color of the wood) could be a genus of twenty three species of flowering plants within the family Fabaceae; native to tropical rainforests of Central and South America; from Guerrero, Mexico, through Central America, and as way as south-eastern Brazil.
Originating from the territories of Central and South America, these tropical timber trees will most ordinarily be found within the rainforests of Brazil, Suriname and Co-operative Republic of Guyana (and conjointly in countries like Panama, Costa Rica, island and Mexican state of Guerrero)
