How to Turn a Wooden Mallet from an Exotic Hardwood Blank

How to Turn a Wooden Mallet from an Exotic Hardwood Blank

To turn a wooden mallet, mount a square exotic hardwood turning blank between centers, round it into a cylindrical head, bore the handle hole across the grain, then turn a handle with a tenon from a second blank. Glue and wedge the handle, then finish it with oil or wax. Dense species such as hard maple, Purpleheart and Osage Orange hold up best, and Exotic Wood Zone stocks them as kiln-dried turning blanks.

What is a Wooden Mallet?

The wooden mallet is probably the most versatile item that you can produce using a lathe machine and the type of wood that you select determines the longevity of the tool. Mallets in shops are usually made of beech but when making a wooden mallet out of exotic wood turning blanks, you select the wood density, color, and grain yourself.

Why turn a wooden mallet from an exotic hardwood blank?

Hardwoods require more hits before becoming dented than do soft woods. Using a mallet instead of a hammer is easier on chisel handles. The wood blank is already squared off and dry when received, thus eliminating the milling process.

Which exotic woods make the best wooden mallet?

Search for dense grain and high density. The following table provides a comparison of popular Turning Woods; Janka numbers are only estimates.

Species

Janka (lbf)

Why it works

Watch out for

Hard Maple

1,450

Tough, tight grain, budget friendly

Plain appearance

Purpleheart

2,520

Dense with vivid purple color

Color darkens with light

Padauk

1,970

Easy to turn, bright orange-red

Color fades toward brown

Osage Orange

2,620

Extremely durable, golden yellow

Dulls tools quickly

East Indian Rosewood

2,440

Smooth, oily, beautiful grain

Fine dust, higher cost

Exotic Wood Zone also lists Black Palm, Spalted Tamarind and Mango turning blanks as suited to spindles, handles and mallets, so you can choose by color as well as weight. Our Wood Species Guide covers more Exotic Woods.

What do you need before you start?

  • One block to be turned into a head blank, around 5 inches in length. Get the largest cross section possible; 2-1/2 inch stock is right for a small mallet.
  • A second blank or dowel rod for the handle, about 1-1/2 to 2 inches square and 10 to 12 inches long.
  • A roughing gouge, spindle gouge, calipers, a drill with a Forstner bit, wood glue and a small hardwood wedge.

How do you turn a wooden mallet step by step?

  1. Support the head stock between centers and shape a round using low revolutions per minute of about 500 to 800 RPM.
  2. Create a cylinder, then bevel its two ends to avoid chipping.
  3. Indicate the center and create a handle hole on the wood parallel to the wood fibers. A hole of 3/4 inch is typical.
  4. Create the handle by creating a taper and a tenon on it, then fit it up without forcing.
  5. Saw a kerf in the tenon, apply glue, seat the handle, then drive in the wedge and trim flush.
  6. Sand through 320 grit and apply penetrating oil or wax.

What mistakes ruin a turned wooden mallet?

The most common mistakes include drilling the handle hole crooked and pressing a hard-tenoned joint until the head breaks. Practice dry fitting before gluing.

Where can you buy turning blanks for a wooden mallet?

Exotic Wood Zone ships from St. Louis, Missouri, and our turning blanks are kiln-dried, wax-sealed and hand-inspected for grain and structure. Browse turning blanks by wood species, like Hard Maple and Purpleheart, and enjoy a 90-day return policy on your purchase.

Wooden mallet FAQs

  1. What is the best wood for a wooden mallet?
    Hard woods with tight grains, including hard maple, Osage orange, Purpleheart, and rosewood, are resistant to dents and will stand up the longest.
  2. What size turning blank do I need?
    A head blank that is around 2-1/2" square x 5" long, and a 1-1/2 to 2" handle blank.
  3. Can I use a spindle blank for a mallet head?
    Yes. Set the blank on center with the grain parallel to the lathe axis, then drill the handle hole through it.
  4. How do I keep the handle from loosening?
    Through Tenon with glue and a wedge driven into a sawn kerf causing it to spread and lock.
  5. What finish is best for a wooden mallet?
    Penetrating oil or paste wax protects the wood while keeping the handle grippy.

Conclusion

A turned wooden mallet comes down to a dense blank, a square handle hole and a wedged tenon. Select hardwoods such as hard maple, Purpleheart or Osage Orange for their value or characteristics, and complete with a protective layer of oil finish. Ready to start? Shop exotic wood turning blanks at Exotic Wood Zone and turn your first wooden mallet this weekend.

Dejar un comentario

Por favor, ten en cuenta que los comentarios deben ser aprobados antes de ser publicados.