- Choosing a selection results in a full page refresh.
- Press the space key then arrow keys to make a selection.
- Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
Buy Australian blackwood, Acacia blackwood Guitar Back & Side Set
The figured grain patterns such as curl commonly called “ringed” in Australia are also seen.
The guitar wood is diffuse-porous (not ring-porous), typically with medium to large pores.
This is quartered sawed guitar back and sides that are more resistant to moisture penetration.
Backs : 21″ x 7 3/4″ / 53.3cm x 19.7cm (2 Pcs)
Sides: 30″ x 4 1/2″ / 76.2cm x 11.4cm (2 Pcs)
Thickness : 0.16″ or 4 mm
NO DEFECTS | NO PIN HOLES | NO CRACKS | WILD GROWN
ALL GUITAR BACK AND SIDE SET ARE QUARTER SAWN
THIS EXACT SAME SET YOU GET!
AIR DRIED | MOISTER CONTENT : 8%
Be the first to ask a question about this.